Recessed electric fireplace also called inserts, like stoves are simple systems that combine the sensory pleasure and decorative fire with a good heating performance. The inserts have a turbine that reinforces the effect of convection hot. Air Unlike stoves, the design is intended to be integrated into the home of a fireplace. The first thing you have to do is choose a suitable size of your fireplace insert. For this note that have to be a small gap at the sides (of at least 3 mm) to provide for the expansion of the walls.
To install the recessed electric fireplace you must follow a series of steps. Since it is necessary to extend the pipe vent to the chimney outlet, you have to install a steel pipe inside the duct. Calculate the length of pipe needed counting on the height of your fireplace. If the home is not completely in the vertical vent must use 45 ° elbows to correct it
12 Picture Gallery: Install Recessed Electric Fireplace
Recessed electric fireplace, break the lining of the chimney just above the lintel with the help of a chisel and a pot. This coating is usually constructed with a simple factory hollow bricks, plaster or, if it is more modern, with plates of plasterboard (plasterboard). In the latter case, plays a cut along the plate and to its extremes, so that later you can replace this piece. If the home is equipped with a record closing shot you must dismount to make accessible the vent insert. Once this operation is completed, carefully clean all the debris. Make electrical connections following the guidelines given by the manufacturer.
This post topic: Inspirations