Making your own oval glass coffee table can seem like a chore to put in the basket “too hard”, but if you leave aside the fancy job routing, curved legs, intricate woodwork and other elements can still make yourself oval center table handsome. A basic set rear edge is all it takes to make sturdy legs of a coffee table on which his solid oval table can connect.
Making an oval glass coffee table are Trace an oval, 40 inches long and 30 inches wide on the piece of wood. Use the jigsaw or coping saw to cut the oval table surface. Place the flat plank landing gear on the work surface and the two pieces of the support leg over the 15-inch ends of the undercarriage so that they form a right angle with the landing gear.
12 Photos Gallery of: Making an Oval Glass Coffee Table
Than for making an oval glass coffee table, Bead a line of glue around the edge of the landing gear and press the leg parts nearby. Fasten the legs in place, first check that they are square with the landing gear using the carpenter’s square. Measuring 3 inches from the edge of the legs, on the outer side of the leg which abuts the landing gear. Make a mark at 3 inches for oval glass coffee table, 1/4 of an inch from the end of the legs.