Silver bar cart – Silver is good color and also makes beautiful decoration. Bar trolleys has been the trend for a while and for good reason. They are both beautiful and functional. Not only are they easy to move from room to room, but they are also versatile. Whether it’s serving your favorite refreshments, organize your go-to craft supplies, or store kitchen essentials, a bar carriage to be one of your must-have furniture. Today, we share how to make an industrial-style bar wagon. With a few simple materials from the hardware store, you will be party-ready in no time.
Making silver bar cart, cut 18-inch x 48-inch pine board in half to form two 18-inches x 24-inch pieces. Most home improvement stores will reduce this for free on a table saw or panel saw. You can also cut it yourself with a circular saw. Keep a one-inch square dowel rod in the corner of pine board, and detect the edge with a pen, which describes a corner notch. Repeat on all four corners, and then repeat on the other pine board. Using a band saw or jigsaw, cut out the four corners of the slots on both cards.
12 Picture Gallery: Silver Bar Cart Design
Place swiveling wheels at the corner of a pine board, which is approximately 1/8 inch from the edges. A corner of the thrower’s mounting plate will be over the open slot. Mark the center of each plate mounting screw hole on the pine board with a pencil, and drill holes with a 1/16 inch twist bit. Secure the flywheel to the board with screws. Let the screw holes of the slit open – it will be secured later.
This post topic: Bar Cart